Post by Wild Willy on Mar 2, 2006 16:37:11 GMT -5
Marty made an inquirey regarding how I made the Freeze Injectors on the collar ring,
I made the ring from Fish-tank hose and conected the 2 ends together at the back with a tip cut from a thin wooden paintbrush.
I then got several pointy wooden toothpiks and one by one I poked the points from the bottom of the ring, straight up through the top side of the ring.
Once popped through I cut the bottoms off close to the bottom of the rings surface and gently poked them right inside the bottom and the holes more or less closed.
Then Useing a manicure type nail trimmer, I guaged and cut each toothpik sticking up to the desired length.
Colored the entire collar silver useing a silver Sharpie marker.
This part of the costume was exhausting for me mentally as well, it was by sheer desperation and a bit of luck that I discovered how soft & easy the tube is to penetrate.
Thanks for the question Marty-man, Hope I explained it in an easy to understand mannor.
Will
I made the ring from Fish-tank hose and conected the 2 ends together at the back with a tip cut from a thin wooden paintbrush.
I then got several pointy wooden toothpiks and one by one I poked the points from the bottom of the ring, straight up through the top side of the ring.
Once popped through I cut the bottoms off close to the bottom of the rings surface and gently poked them right inside the bottom and the holes more or less closed.
Then Useing a manicure type nail trimmer, I guaged and cut each toothpik sticking up to the desired length.
Colored the entire collar silver useing a silver Sharpie marker.
This part of the costume was exhausting for me mentally as well, it was by sheer desperation and a bit of luck that I discovered how soft & easy the tube is to penetrate.
Thanks for the question Marty-man, Hope I explained it in an easy to understand mannor.
Will
No problem Pal. while yer at the Fish store, uh... dont feed the fish. 